Free 25-question CCO practice test with answers. No sign-up. Start now
OVR · Free practice test

CCO overhead crane practice test

Overhead and gantry cranes run on runways in plants and yards. The questions lean on ASME B30.2, OSHA 1910.179 and the below-the-hook rules in B30.20.

$210written fee
$70practical fee
B30.2main standard

20 Overhead crane practice questions with answers

Pick an answer to see whether you were right and why. Reviewed November 2026. No sign-up.

Not started20 to go
  1. Overhead Crane

    1.What is the "trolley" on an overhead bridge crane?

    Show answer

    Answer: A. The unit that carries the hoist and travels along the bridge girder(s). The trolley traverses the bridge and carries the hoisting mechanism, giving the crane its cross-travel motion.

  2. ASME B30.2 Standard

    2.According to ASME B30.2, when shall the operator activate the warning device?

    Show answer

    Answer: C. Before starting the bridge or trolley motion and intermittently during travel when approaching persons in the path of the load. When a warning device is furnished, it shall be activated before starting the bridge or trolley motion of the crane and intermittently during travel when approaching persons in the path of the load.

  3. Below the Hook (B30.20)

    3.Under ASME B30.20, a below-the-hook lifter that has been idle for 14 months shall be inspected how before returning to service?

    Show answer

    Answer: D. In accordance with the PERIODIC inspection requirements. The correct answer is a periodic inspection — idle one year or more requires it. The trap is 'frequent,' which covers idle periods of one month to one YEAR; 14 months just crosses that line, and the near-miss interval is the trick.

  4. Overhead Crane

    4.When a duplex (double saddle) hook is used, what rigging is required?

    Show answer

    Answer: B. A double sling or choker, to assure the load is equally divided over both saddles of the hook. A duplex hook requires a double sling or choker so the load divides equally over both saddles. Also make certain slings and lifting devices are fully seated in the hook saddle with the hook latch closed before moving any load.

  5. ASME B30.2 Standard

    5.According to ASME B30.2, what is the periodic inspection interval for cranes in normal or heavy service?

    Show answer

    Answer: B. Yearly. Periodic inspection intervals are yearly for normal and heavy service and quarterly for severe service.

  6. Below the Hook (B30.20)

    6.What is the frequent inspection interval for a lifter in severe service?

    Show answer

    Answer: D. Daily to weekly. Frequent inspections are performed daily to weekly for severe service, weekly to monthly for heavy service, and monthly for normal service.

  7. Overhead Crane

    7.Swinging loads can be controlled by use of the?

    Show answer

    Answer: C. bridge or trolley controls. Swing is a horizontal pendulum motion, so it is dampened by using the bridge or trolley controls to reposition the crane over the load's center of gravity.

  8. ASME B30.2 Standard

    8.According to ASME B30.2, other persons such as maintenance personnel, test personnel, and crane inspectors who must operate a crane in performing their duties shall be trained how?

    Show answer

    Answer: C. In accordance with the training requirements of this Volume. Maintenance personnel, test personnel, and crane inspectors, when it is necessary to operate a crane in the performance of their duties, shall be trained in accordance with the training requirements of the Volume.

  9. Below the Hook (B30.20)

    9.What is the periodic inspection interval for a structural or mechanical lifter in normal service for equipment in place?

    Show answer

    Answer: C. Yearly. Periodic inspections of structural and mechanical lifters are yearly for normal service, semiannually for heavy service, and quarterly for severe service.

  10. ASME B30.2 Standard

    10.According to ASME B30.2, wire rope clips shall be of what material and type?

    Show answer

    Answer: D. Drop-forged steel of the single-saddle (U-bolt) or double-saddle type; malleable cast iron clips shall not be used. Wire rope clips shall be drop-forged steel of the single-saddle (U-bolt) or double-saddle type; malleable cast iron clips shall not be used.

  11. Below the Hook (B30.20)

    11.When a lifting device consists of several lifters detachable from the group, what does ASME B30.20 require?

    Show answer

    Answer: B. Each detachable lifter shall also be marked with its individual rated load. If the lifting device is made up of several lifters, each detachable from the group, these lifters shall also be marked with their individual rated loads.

  12. Overhead Crane

    12.What special precaution applies to yard cranes on outside runways when parking?

    Show answer

    Answer: B. Set the brake and anchor the crane securely so it will not be moved by the wind. On yard cranes, operators should set the brake and anchor securely so the wind cannot move the crane.

  13. ASME B30.2 Standard

    13.According to ASME B30.2, the crane operator signals MAGNET IS DISCONNECTED how?

    Show answer

    Answer: C. Spreads both hands apart, palms up. The crane operator signals that the magnet is disconnected by spreading both hands apart with palms up.

  14. Below the Hook (B30.20)

    14.A lifting device that has been idle for 1 year or more shall be inspected how before returning to service?

    Show answer

    Answer: B. In accordance with the periodic inspection requirements. A lifter idle for 1 year or more shall be inspected in accordance with the periodic inspection paragraph before being returned to service.

  15. Overhead Crane

    15.Which CMAA service class fits heavy machine shops, foundries and steel warehouses with 10 to 20 lifts per hour approaching 50% of rated capacity?

    Show answer

    Answer: A. Class D (Heavy Service). Class D heavy service covers heavy machine shops, foundries, fabricating plants and steel warehouses with 10 to 20 lifts per hour averaging 15 feet.

  16. ASME B30.2 Standard

    16.According to ASME B30.2, gantry crane stairways shall be at an angle of not more than how many degrees from the horizontal?

    Show answer

    Answer: A. 50 deg. Stairways shall be equipped with metal handrails and should be at an angle of not more than 50 deg with the horizontal, with slip-resistant walking surfaces.

  17. Below the Hook (B30.20)

    17.To which BTH-1 Design Category shall lifters be designed unless a qualified person determines otherwise?

    Show answer

    Answer: A. Design Category B (static strength criteria). Lifters shall be designed to BTH-1 Design Category B and the proper Service Class unless a qualified person representing the owner, purchaser, or user determines and can demonstrate that Design Category A is appropriate.

  18. Overhead Crane

    18.Plugging a radio-controlled overhead crane is intended for emergency stops only. When it is used, what must the operator do?

    Show answer

    Answer: B. Pause a second or two on first point in the direction opposite to travel. Pausing on first point reverse limits the reversing current and torque shock; going straight to a high point can damage the drive and slam the load. Regular use of plugging to stop the crane is not permitted without qualified supervision's authorization.

  19. ASME B30.2 Standard

    19.According to ASME B30.2, what is the periodic inspection interval for a crane in severe service?

    Show answer

    Answer: C. Quarterly. Cranes in severe service require periodic inspection quarterly, versus yearly for normal and heavy service.

  20. Below the Hook (B30.20)

    20.In the breakaway force test, the rated load for permanent magnet lifters shall be less than what percentage of the measured breakaway force?

    Show answer

    Answer: D. 33%. The rated load for permanent magnet lifters shall be less than 33% of the breakaway force measured in the test; for electromagnet lifters it shall be less than 50%.

What the Overhead crane exam covers

  • Bridge, trolley and hoist controls
  • Frequent and periodic inspection
  • Warning devices and signals
  • Below-the-hook lifters (B30.20)
  • Hooks, rope clips and hardware
  • Parking and securing outdoor cranes

Fees from the CCO fee schedule.

Study the whole Overhead crane exam

5,000+ practice questions across core and every specialty, timed practice exams, a load chart trainer and audio lessons. One payment of $197 covers 12 months.

Overhead crane exam questions

Does OSHA require overhead crane certification?

OSHA 1910.179 says only designated personnel may operate an overhead crane. It does not name a certification, so employers decide how to qualify operators, and many use CCO.

What does CCO overhead crane certification cost?

CCO lists $210 for the overhead crane written exam and $70 for the practical.

Which standards do overhead crane questions come from?

ASME B30.2 for overhead and gantry cranes, OSHA 1910.179, and ASME B30.20 for below-the-hook lifting devices.

Are these the real CCO exam questions?

No. CCO does not publish its exam questions. These are original practice questions on the same overhead crane topics, each with the rule or reason behind the answer.

More free CCO practice tests

5,000+ questions in the app.Get full access